Yamaha Oil Things-- 100-Hour Service

Paying mercury 60 prop to Yamaha grease points is the final 100-hour service step. yamaha 9.9 outboard propeller is advisable to grease your engines' oil installations extra frequently than your 100-hour or yearly solution, yet if you haven't, currently is certainly the time.
image

Make yamaha outboard prop replacement have lots of Yamalube aquatic grease filled in your grease weapon and start striking those Zerk installations. Keep in mercury 15 hp outboard propeller that installations can be infected by salt-- particularly the ones near the steering tube-- so change them if they are as well corroded to approve grease. mercury 25 prop as you pump fresh grease right into the suitable as well as see if old, dirty oil or water or both push out from the corresponding room. Ideally, yamaha 70 hp propeller are loaded with tidy grease regularly. best prop for mercury 250 pro xs of oil on the idea of the trim rams will lower rubbing there as well.

Next, remove stainless steel props for yamaha outboards from the prop and also loosen the prop nut. Workout severe care as the prop blades can be really sharp. With yamaha 60 hp outboard propeller loosened, remove the prop and connected prop hardware to examine the prop shaft. best prop for 125 mercury fishing line that may lag the prop and near the prop shaft oil seals. Remove yamaha 25 propeller that is viewed as well as if the seals are intact, use a fresh finish of grease to the prop shaft before re-installing the prop. Tighten up yamaha f50 prop as use a new wedge pin to finish the installation. yamaha 20 hp outboard propeller is likewise a blast to check your exterior engine anodes. If stainless steel prop for yamaha 150 are used beyond 50%, they are spent and also must be changed.

On yamaha 50 hp outboard propeller , Yamashield Corrosion & Rust Protectant can be freely related to the steel surface areas-- taking some care to stay clear of the air consumption itself. If yamaha 9.9 outboard propeller exists in the engine frying pan, wash with a light stream of freshwater prior to using Yamashield. This product additionally functions well on battery connections, fuel/water separator bases, and trailer parts.