Log in

5 Simple Techniques For iota outdoors tikka stock - The Optics Talk Forums

    Slot Joensen
    By Slot Joensen

    Tikka T3 and T3x — Value, Performance, Upgradability « Daily BulletinRemington 700 Chassis Bravo - Kinetic Research Group


    Getting My Rifle Stocks - Delta Mike Ltd To Work

    Question, does it utilize the factory trigger guard and magazine?thanks. Posted By: Gunner75 Re: After market stocks for Tikka T- 3 lite - 06/01/11 ADL Medalist? B&C doesn't produce a complete out Medalist variation of the ADL. B&C does produce a Medalist ADL that has the Modified Pillar system. The Savage sporter (LA 2980) is a larger outside stock and the layup is a bit more.


    image

    25lbs. Undoubtedly yours is beyond that or with the addition of bed linen or LOP modification, scale distinction, etc ??? The 1042 is a drop in created stock. Eliminate the barreled action, triggerguard and magazine, swap stocks and tighten up down. All transfers right over with the exception of the recoil lug. Published By: dogcatcher223 Re: After market stocks for Tikka T- 3 lite - 06/01/11 Sorry, meant to type BDL.

    New Stocks and Upgraded Triggers for Tikka T3 « Daily BulletinTikka t3x lite stock modifications - Rokslide Forum


    38oz on a postal scale. It is on my M700 brief action 204. The one for the Savage weighed in at exactly 40oz right out of package. I like the stocks, however would not want them if I was trying to develop a light-weight weapon, which is the entire point of a T3.

    The Facts About Thoughts on aftermarket Tikka stocks and barrels - Rokslide Revealed


    I would enjoy absolutely nothing more than to keep all Medalist sporters at or below 2lbs. However we have had difficulty doing this. We are wanting to trim this out soon with some new methods and requirements. Exterior stock shape has a lot to do with weight in addition to bedding block design, and even climate condition while producing stocks.

    Although still considered a Medalist, you are proper. The modified Lug block and Pillar/tail system is used to assist in a weight cost savings, however the stock is laid up differently too to add strength. We can build the Ti series with a block and hit 1. 7lbs without concern, but $$$ enters into play.

    It is one pc with a tail system added. The block ended up very very slick to state the least. Click Here For Additional Info -new 1042 T3 stock will be a hit for sure. Posted By: dogcatcher223 Re: After market stocks for Tikka T- 3 lite - 06/01/11 Hard to distinguish the pictures, but it appears like no checkering? Thanks.


      Slot Joensen

      Slot Joensen