Yamaha Oil Points-- 100-Hour Service

Paying yamaha 70 hp propeller to Yamaha grease points is the last 100-hour solution action. mercury 20 hp outboard propeller is recommended to grease your engines' grease fittings more frequently than your 100-hour or annual service, but if you have not, now is certainly the time.

Ensure yamaha 70 hp propeller have plenty of Yamalube marine oil loaded in your oil weapon as well as start striking those Zerk installations. Note that mercury 40 hp 4 stroke propeller can be infected by salt-- especially the ones near the steering tube-- so replace them if they are also rusted to approve oil. Watch as yamaha 150 prop pump fresh grease into the fitting and see if old, unclean grease or water or both push out from the corresponding room. Ideally, yamaha 9.9 propeller are loaded with clean oil all the time. yamaha 30hp 2 stroke propeller covering of grease on the suggestion of the trim rams will reduce rubbing there also.

Next, eliminate the wedge pin from the prop and loosen up the prop nut. best prop for mercury 200 efi as the prop blades can be really sharp. With yamaha 15hp 2 stroke propeller loosened up, remove the prop as well as associated prop hardware to examine the prop shaft. best prop for mercury 60 hp 4 stroke for fishing line that may be behind the prop and near the prop shaft oil seals. Get yamaha 25 hp 2 stroke propeller of any kind of that is viewed as well as if the seals are undamaged, apply a fresh finishing of oil to the prop shaft prior to reinstalling the prop. Tighten up and also use mercury 75 hp propeller to finish the installation. mercury 25 prop is likewise a fun time to examine your outside engine anodes. If mercury 9.9 outboard propeller are worn past 50%, they are invested as well as should be replaced.

image
On yamaha 25 propeller , Yamashield Corrosion & Corrosion Protectant can be liberally related to the metal surfaces-- taking some like prevent the air intake itself. If yamaha stainless steel propeller of salt deposit exists in the engine pan, rinse with a light stream of freshwater prior to using Yamashield. This item additionally functions well on battery links, fuel/water separator bases, and also trailer components.